Banner
What are the cooling methods for aluminum alloy worm gear reducers?
- 2019-03-12-

In order to improve the efficiency of the aluminum alloy worm gear reducer, the worm gear is made of non-ferrous metal as the primary material. The worm is generally made of hard steel, so it is easy to generate large heat during use, and the temperature of the reducer is difficult to use. Control is within the operating temperature range.

The operating temperature of the aluminum alloy worm gear reducer should be controlled at -40 ° C ~ 40 ° C, when the ambient temperature is lower than 0 ° C should be heated before starting, so that the lubricant is fully dissolved or use a low freezing point of the lubricant.

The aluminum alloy worm gear reducer is a mechanical transmission installation in many fields of the national economy. The product categories touched by the industry include various gear reducers, planetary gear reducers and worm reducers. It also includes various special drive installations, speed control installation, And various types of composite drive installations including flexible drive mounting. The scope of product service touches industries such as metallurgy, nonferrous metals, coal, building materials, ships, water conservancy, electric power, engineering machinery and petrochemicals.

1. A cooling coil is installed in the tank oil pool, and the cooling water in the tube takes away a part of the heat of the lubricating oil.

2. The fan is cooled, and an electric fan is added to the outer shaft of the worm to increase the heat dissipation to cool down.

3. Add heat-dissipating fins outside the box to increase the heat dissipation surface.

4. Install the lubricating oil outside the cycle to reduce the oil temperature.

Worm gear Xuan reducer cooling method?

1. A cooling coil is installed in the tank oil pool, and the cooling water in the tube takes away a part of the heat of the lubricating oil.

2. Install the lubricating oil outside the cycle to reduce the oil temperature.

3. The fan is cooled, and an electric fan is added to the outer shaft of the worm to increase the heat dissipation to cool down.

4. Add heat-dissipating fins to the outside of the box to increase the heat dissipation surface.

In order to improve the efficiency of the worm gear reducer, the worm gear is made of non-ferrous metal as the main data. The worm is generally made of hard steel. Therefore, it is easy to generate large heat during use. In addition, the temperature of the reducer is difficult to control. Use within the temperature range.

Install some cooling devices to ensure that the geared motor can be used normally. The inside is equipped with a cooling spiral tube, and the user can connect some cooling water by himself. When the cooling water passes through the spiral tube, the heat is transferred to the cooling water to transfer the heat to reach the cooling effect.

咨询热线
0769-22822720